40 Industrial Park Dr.

Available Industrial Property (NH000248)

Address:
40 Industrial Park Dr.
Merrimack County
Franklin, NH 03232
Location:
Central part of state; just 20 mi N of Concord
Building Size:
99,700 SF
Lot Size:
7.50 Acres + 30.50 Acres

Attachments

Download Brochure

Brochure

Download

Download Extra Ground Maps

Extra Ground Maps

Download

Download Site Plan

Site Plan

Download

Property Description
Year Built
1989 / 1995
Quality
Excellent
Office
27,000 SF
Partial 2-story configuration consisting of a number of private and general office areas, with executive offices on the the 2nd level.
Ceiling Height
Min: 14', Max: 83'
Ceiling Type
Metal - Steel Truss
Ceiling Comments
Ceilings are a combination of steel truss and dropped acoustical ceiling tiles.
Northwest end:
1,400 square feet: 83’
1,400 square feet: 58’
4,000 square feet: 25’
6,000 square feet: 22’
South end (loading and adjacent area):
8,450 square feet: 16’ 6”
Balance of plant at 14'
Column Spacing
35' x 40'
Column Comments
Steel
Roof
Ballasted rubber membrane over 3" rigid insulation (R22) over on and a half metal decking.
Floors

Reinforced Concrete - Mostly 6” concrete slab reinforced with 6 x 6 with 10/10 w.w.m. over 12” compacted gravel. Much of the plant floor is improved with a heavy epoxy covering.
Walls
Insulated metal panels with decorative block wainscot along the front wall, and wood cedar siding and glass panels on the office facade.
Lighting
Combination of fluorescent and metal halide units; exterior via pole & wall mounted halogen units.
Loading
South Wall: Two (8’ x 8’) insulated metal tailgate dock doors and one (8’ x 10’) insulated metal dock door all equipped with load levelers, dock seals, and dock lights; One (7’ x 6’) insulated metal tailgate dock door; One (8’ x 8’) insulated metal drive-in door (to maintenance area); One (8’ x 18’) insulated metal drive-in door (to private garage).
North Wall: Two (10’ x 12’) insulated metal drive-in doors
Parking
185 cars
Rail
No
Gas
Natural-2" high pressure svc. line at 60 psi - Supplied by Keyspan via one 2” high pressure service line at 60 psi. Distribution is via (1) 8” line and 10” water column, and (4) 3” lines at 5 psi.
Power
Two pad mounted primary transformers feeding (2) main Square D switch gears, both rated at 2500 amps, 480/277 volts, 3 phase, 4 wire; Power is dist. via (23) 480/277 subpanels and (18) 208/120 subpanels
Heat
Gas fired roof top package HVAC units provide heat throughout the office areas and heat throughout the plant area.
Air Conditioning
Yes - 100% air conditioning in offices - Gas fired roof top package HVAC units provide air conditioning throughout the office areas. There is also one pad mounted McQuay unit providing “cooling” in the plant.
Sprinklers
Yes - 100% wet system via one 8" line and two 6" risers
Air Line
One Joy screw air compressor rated at 75hp (125 psig). Compressed air lines are distributed throughout the plant.
Equipment
One Aget and one Sternvet dust collectors are situated in the south end of the facility adjacent to the loading area.

Exterior dust collectors in place include the following units; Filtrex, DCE Dalamatic, DC104001

A considerable amount of duct work is still in place in the south end of the facility, associated with the dust collection systems.
Clean Room
No - Still containing much of the original clean room infrastructure, in the northwest end of the plant is a 3,600 square foot area and in the northeast end of the plant is a 4,000 square foot area, both formerly utilized for clean room applications.
Special Features
One 20-ton Sterling chiller is in place in the south end of the facility.

Situated off the southwest corner of the facility is a fully enclosed concrete tank farm featuring six 6,000 gallon double walled fiberglass over metal Buffalo Corporation tanks. One of the tanks contains insulated corrugated aluminum around the exterior. The tanks were utilized to store liquid resins and acetone.
Miscellaneous
Krones Security System featuring magnetic smart cards is in place; Freight Lift rated at 20,000 lbs. is in place in the south end of the facility, providing material handling between the loading and maintenance areas.
Last Use
Mfg. of prepeg/copper-clad laminates for multi-layer circuit boards
Additional Information
Hart Corporation - New Hart Corp - Avon Park South, 10 Tower Lane - Avon, CT 06001 - 860.678.2222 - hart@hartcorp.com
All information furnished is from sources deemed reliable, but no warranty or representation is made as to the accuracy thereof and same is submitted subject to errors, omissions, change of price, rental or other conditions, without notice. No liability of any kind is to be imposed on the broker herein.